WearsCube

Cut and sew clothing manufacturer

Garments built from the roll of fabric up: pattern making, grading, cutting, stitching and finishing to your specification.

Request a quote

Photo to add

Cut and sew in progress at the WearsCube factory in Sialkot

What cut and sew means

A cut and sew garment starts as a roll of fabric. Pattern pieces are laid out, cut and stitched into a finished product. It is the opposite of buying a ready-made blank and decorating it. Because everything is made from scratch, you decide the fabric, the fit, the stitching and every detail.

The stages of a cut and sew order

  1. Pattern making. A pattern is drafted for your base size from your measurements or a reference garment.
  2. Sampling. One piece is sewn in the correct or a similar fabric for fit approval.
  3. Grading. The approved pattern is scaled to every size in your range.
  4. Marker making. Pattern pieces are arranged on the fabric width to waste as little as possible.
  5. Cutting. Fabric is spread in layers and cut to the marker.
  6. Printing or embroidery. Panels are decorated flat, before assembly.
  7. Stitching. Panels are sewn on the machines the seam type needs: overlock, flatlock, coverstitch, lockstitch.
  8. Finishing. Thread trimming, pressing, labelling, measurement checks and packing.

How much fabric a garment uses

Fabric is the biggest cost in most garments, so consumption matters. It depends on the garment's measurements, the fabric weight and how efficiently the pieces fit on the fabric width. The fabric consumption calculator gives a working estimate per piece and for a whole order.

When cut and sew is the right choice

Choose cut and sew when fit, fabric or construction is part of what you sell: an oversized block, a specific fabric weight, panelled designs, or all-over prints. If you only need a logo on a standard tee, decorating blanks is quicker and cheaper for small runs. The article on private label versus cut and sew covers the trade-offs.

Photo to add

Close-up of the cut and sew process on a garment panel

Process detail
Photo to add

Finished result of cut and sew on a production garment

Finished result
Photo to add

Quality check carried out after cut and sew

Checked before packing

Questions buyers ask

Is cut and sew more expensive than printing on blanks?

Per piece it usually costs more at small quantities, because of pattern development and minimum fabric quantities. In return you control fabric, fit and construction.

Do you make the patterns?

Yes. Patterns are drafted from your measurements or a reference garment, then graded across your sizes once the sample is approved.

Can I supply my own fabric?

Tell us what you have. Buyer-supplied fabric can be used if it suits the garment and arrives with enough allowance for testing and wastage.

Send us your tech pack or a reference sample

Tell us the garment, fabric, decoration and quantity. We reply by email with pricing, minimums and timing for your order.

Request a quote Ask a question